Application do s apply when the surface and air temperature is 50 f 10 c to 95 f 35 c stir well before using saturate all end grains nail holes and cracks in the wood.
Sikkens cetol door and window sanding before final coat.
Available as a clear satin clear gloss or 4 ready mix colors in satin.
Apply second coat of cetol door window 5.
Apply 3rd coat of cetol door window 7.
Apply final coat and reattach hardware photo by kit latham.
Coat all sides of door.
Clean tools with mineral spirits.
Let surface dry for minimum of 24 hours 6.
In order to restore this home s front door to its original condition our team at monk s completely stripped the door and sanded it to the bare wood.
Dries to touch in approximately 12 hours.
This process was repeated once more before applying the final coat of.
Brush on the second coat following the same order and let it dry overnight.
Apply third coat of cetol door window 7.
Apply in the direction of the grain.
Apply a third coat of cetol i.
After the finish has dried overnight gently hand sand it with 220 grit paper.
Apply 2nd coat of cetol door window 5.
Sikkens proluxe cetol door and window is a premium translucent exterior stain whose alkyd high solids formulation offers optimum protection and a distinctive look for these unique areas.
Clean tools with mineral spirits.
Working with cetol door window application do s apply when the surface and air temperature is 50 f 10 c to 95 f 35 c stir well before using do not apply in direct sunlight saturate all end grains nail holes and cracks in the wood.
Working with cetol door window preparation procedures new weathered uncoated wood sand door and window surfaces with 80 120 grit sandpaper prior to application of cetol door window.
Re sanding may be necessary.
You don t want to sand through to bare wood dust the door and wipe it down with a tack cloth.
Let surface dry for minimum of 24 hours 4.
Apply a third coat of door window wood finish.
The best method to prepare vertical wood surfaces is to sand with 80 120 grit sandpaper.
It is always recommended to perform a three 3 coat color and sheen test sample of the wood.
Apply a second coat of cetol i.
Let surface dry a minimum of 24 hours.
Let surface dry a minimum of 24 hours.
Wait 7 days before using furniture.
Let surface dry for minimum of 24 hours 6.
However an alternate to sanding for preparation is listed below.
Apply 1st coat of cetol door window 3.
Apply one coat of cetol door window.
After sanding the door it was refinished with a base coat of sikkens cetol 1.
Clean tools with paint thinner or mineral spirits maintenance procedures proper maintenance starts with visual inspection.
A more resilient alternative to exterior varnishes and polyurethanes.
Old damaged coatings must be completely removed before application of cetol door window.
Dries to recoat in 24 hours additional coat may increase these times.